4 - Frame-Automatic Honey Extractor For “Dadant”, “Zander”, “DNM”, Frames, Belt Drive

Technical data:

• 
  Container diameter: 820 mm (830 mm with ring)
  
• 
  Container height: 760 mm
  
• 
  Total height including frame: 1100 mm
  
• 
  Distance from tap to floor: 330 mm
  
• 
  Width including feet: 850 mm
  
• 
  Weight: 51 kg
  
• 
  Usable volume: 50 liters
  
• 
  Cassette width: 5 cm
  
• 
  Output: approx. 35–50 frames/hour
  

Motor & Control:

• 
  Motor power: 300 W
  
• 
  7 automatic programs + manual mode
  
• 
  Power supply:
  
  
  220 V (via transformer)
  
  
  12V DC (battery)
  
  
  

Construction:

• 
  Automatic alignment of the cassettes when stationary
  
• 
  Automatic direction change during operation
  
• 
  Rotor made of stainless steel profile tube

Materials:

• 
  Container, rotor and cassettes made of stainless steelAISI 304
  
• 
  Stainless steel tap
  
• 
  Container material thickness: 0.6 mm
  
• 
  Cassettes: welded (argon welding)
  
• 
  Wire thickness:
  
  
  Grid: 3 mm
  
  
  Frame: 5 mm
  
  
  
• 
  Mesh size: 4 × 2 cm
  

Care & Cleaning:

• 
  Clean with warm water after each use.
  
• 
  Do not use harsh cleaning agents.
  
• 
  Dry thoroughly before prolonged storage.
  
• 
  Protect electrical components from moisture
  

Manual mode:

• 
  Speed: 50–300 rpm (adjustable)
  
• 
  Operating time: 1–9 minutes
  
• 
  Direction of rotation: Forward / Backward
  

Important instructions:

• 
  Direction change only occurs when the rotor is completely stationary.
  
• 
  Always start at medium speed.
  
• 
  Do not operate at maximum speed immediately.
  
• 
  When using a generator, an additional load is required.
  
  (see generator manufacturer's specifications)
  

Automatic mode:

• 
  Selection of 7 preset programs
  
• 
  Speeds, directions and times are factory set.
  
• 
  Adjustment possible in programming mode
  
• 
  Automatic 20-second pause between changes of direction
  

Programs:

• 
  Program 1: 120 rpm → 2 min / 120 rpm → 2 min
  
• 
  Program 2: 160 rpm → 2.5 min / 160 rpm → 2.5 min
  
• 
  Programs 3–7: Multi-stage programs with varying speeds
  
  (100–200 rpm, 1.5 minutes each)